6161 Webster Street Dayton, OH 45414 | Tel: (937) 660-8182
  • English
  • Español

Horizontal Burnishing Machine

  • PLC Controller
  • Horizontal 3-Roll configuration
  • NEMA electrical enclosure
  • Completely pneumatic operation
  • Loader system with automation

The APV removes nicks, burrs, heat-treat scale or other foreign matter from the gear tooth flanks. This is accomplished through a cam-activated, oscillating action between the three burnishing gears and the component.

With its automatic loader, the APV receives parts from either rolling type automation or a manual loading chute. The automatic loader accepts one part per cycle into the oscillating part lifter for fast and reliable loading. The part lifter has two positions so that both loading and unloading are simultaneous with the burnishing cycle.

After the part lifter has advanced a new part to the working elevations, a shuttle loader/part stripper moves the part to the burnishing position in a positive, jam-proof manner.

The total door-to-door cycle time is only seconds per part and is variable, based on the size of nicks to be removed and the geometry of the component to be burnished.

Vertical Burnishing Machine

  • PLC Controller
  • Vertical oscillating system
  • NEMA electrical enclosure
  • Completely pneumatic operation
  • Loader system with automation

The APV removes nicks, burrs, heat-treat scale or other foreign matter from the gear tooth flanks. This is accomplished through a cam-activated, oscillating action between the three burnishing gears and the component.

With its automatic loader, the APV receives parts from either rolling type automation or a manual loading chute. The automatic loader accepts one part per cycle into the oscillating part lifter for fast and reliable loading. The part lifter has two positions so that both loading and unloading are simultaneous with the burnishing cycle.

After the part lifter has advanced a new part to the working elevations, a shuttle loader/part stripper moves the part to the burnishing position in a positive, jam-proof manner.

The total door-to-door cycle time is only seconds per part and is variable, based on the size of nicks to be removed and the geometry of the component to be burnished.